Skip to content
This website are still in testing, please do not place any order yet. thank you !
This website are still in testing, please do not place any order yet. thank you !

OM

RSS
  • February 21, 2022 JinGina

    11.1 - General Guidelines

    If the engine was not making unusual noises before it quit running, and it feels normal when you operate the kick starter, you can probably rule out a major mechanical problem. First, check the fuel system: Make sure you have...

    Read now
  • February 21, 2022 JinGina

    10.4 - Trouble Shooting - Poor Handling

    Steering is Heavy Steering stem nut is too tight Damaged steering head bearings Check tire pressure   Either Wheel Has a Wobble Excessive wheel bearing play Bent rim Improperly installed wheel hub Bent frame Loose or broken spokes Old tires...

    Read now
  • February 21, 2022 JinGina

    10.3 - Trouble Shooting - Poor Performance at High Speed

    Examine the Fuel Line – Disconnect the fuel hose at the carburetor. Is the fuel flowing freely? NO      -  Clogged fuel hose/line or clogged fuel filter Clogged fuel valve Clogged fuel tank breather hose      YES     -  Go to STEP...

    Read now
  • February 21, 2022 JinGina

    10.1 - Engine Lacks power

    Examine the Drive Train – Raise the wheel off the ground and spin by hand. Does the wheel spin freely? NO      -  Brake dragging, improperly mounted brake pads Worn or damaged wheel bearings Bent Axle      YES     -  Go to...

    Read now
  • February 21, 2022 JinGina

    9.5 - Chain Adjustment & Replacement

    Follow the procedure below to make adjustments to the drive chain slack. Be sure that you are parked on a level surface and the engine is turned OFF. DRIVE CHAIN ADJUSTMENT Loosen the rear axle nut Loosen the adjuster lock...

    Read now
  • February 21, 2022 JinGina

    9.4 - Chain Slider Inspection

    Check the swing-arm chain slider for wear and/or damage. Fig. 1 Replace the slider if falls below the limits indicated below: Top Section: 5 mm Bottom Section: 3 mm Check the rear sprocket chain guide slider for wear and/or damage....

    Read now
  • February 21, 2022 JinGina

    9.3 - Chain Roller Inspection

    Check the bottom chain roller for wear and/or damage. Measure the diameter of the drive chain roller and replace it if it falls below the limits indicated below:        Roller: 28 mm (New Roller: 35 mm)         Check the...

    Read now
  • February 21, 2022 JinGina

    9.1 - Chain Inspection

    The service life of your drive chain will depend on several factors including proper lubrication, adjustment, and riding style. If you are an experienced rider and tend to ride in a more intense manner, or you ride in muddy/dusty areas,...

    Read now