Loose, worn or damaged suspension components may affect the stability and handling of your motorcycle. If any of the suspension components seem to be worn or damaged, see your AJ1 dealer for service and/or inspection. Your AJ1 dealer is the...
The rear suspension of your motorcycle has 2 different adjustment points. It can be adjusted for the rider’s weight and riding conditions by changing the spring pre-load, rebound and compression damping points. It comes from the factory set to the...
FRONT FORK DAMPING Compression Adjustment (if applicable) This adjustment effects how quickly the front forks compress. The compression adjuster has 18 click positions. Turning the compression adjuster screw 1 one click changes how the fork compression responds. To adjust the forks...
VIN / PIN / Chassis Number The VIN number is located on the neck of the chassis. Right side of frame. Engine Model & Serial Number The engine model number and serial numbers are stamped on the left side of the...
Loose, worn or damaged suspension components may affect the stability and handling of your motorcycle. If any of the suspension components seem to be worn or damaged, see your AJ1 dealer for service and/or inspection. Your AJ1 dealer is the...
Both the front and rear brakes are the hydraulic oil disc type. As the brake pads wear out, the brake fluid level will drop. A leak in the system will also cause the level to drop. Frequently inspect the system...
The recommended standard spark plug will work very well in most riding condition. However, if you plan on riding for extended periods of time at high speed or high engine rpm in hot climates, or plan extended riding in cold...
In order, to ensure the best performance and durability from the clutch, always be sure you have proper clutch free-play. Free-play is needed to ensure that the clutch has room for wear. A clutch with no free-play will begin to...
The idle setting of the carburetor has a big influence on the vehicle’s starting behavior, on stable idling and on the vehicles response when the throttle is opened. An engine with a correctly set idle speed is easier to start...
